Chia Sẽ Kinh Nghiệm Về IT



Tìm Kiếm Với Google
-


Gởi Ðề Tài Mới  Gửi trả lời
 
Công Cụ Xếp Bài
Tuổi 18-10-2013, 11:16 AM   #1
hoctinhoc
Guest
 
Trả Lời: n/a
Sử dụng Email Server nào cho Plesk? Chuyển từ Mail Enable to Ice Warp

Sử dụng Email Server nào cho Plesk? Chuyển từ Mail Enable to Ice Warp



1. Các Email Server mà Plesk 11 đang hỗ trợ


http://download1.parallels.com/Plesk...-based-os.html

Mail servers
MailEnable Standard / Professional / Enterprise 5.10 - 7.07
SmarterMail 6.8 - 11 (Please check Known Problems and Limitations part)
IceWarp Mail Server 10.0 - 10.4.4 Webmail tools
MailEnable Web Client
SmarterMail Web Client
IceWarp (Merak) Mail Server Web Client
Atmail Open 1.0.5
Trong list trên em thấy có loại Mail Server mà anh đang sử dụng IceWarp Mail Server, Icewarp = Merak

2. Để chuyển từ Email Server mặc định của Plesk từ Mail Enable qua bên IceWarp anh làm theo các bước như sau:

“””””””””””””””” ”””””””””””””””” ”””””””””””””””” ”””””””””””””””” ””””””””””
1). While Mailenable is running on the server, install Merak Mail server, change the POP3/SMTP ports of Merak to non standard ports, restart merak services & keep merak running. e.g run pop3 on port 111 & run smtp on port 26.

2). Stop all the mail services (mailenable) in plesk services monitor ( If this is not done activity will not complete).

3). Login to Plesk go to Server Components & change the Mailserver selection from Mailenable to Merak & the process will begin. During this time you may also change the selection of antivirus & antispam to Merak Mail Server Antivirus & Antispam respectively if you want.

4). After a time of 30 minutes or 1 hour, plesk may throw the error 'page cannot be displayed if you have large number of domains' however dont panic or restart any services/server & let the server be in the same state. During this time the activity runs in background & plesk may copy the mailbox data of most of the users to X:\Program Files\SWsoft\Plesk\tmp\._MailArchive directory of plesk & this may take hours (plesk wont copy the maildata from mailenable mailboxes to merak mailboxes). You can watch this by goin to realtime acitivty monitor of your antivirus program where it continously writes data to the ._mailarchive folder. Once plesk completes copy of mailbox data you can see that plesk writes the configuration to merak folder & by this time it is understood that plesk writes the configuration in merak. Plesk will create all the domains, users & email address with their same passwords as well as redirection & groups. On this completes you can see that the Mailservices in Plesk Monitor are being changed to Merak Services.

5). You may then change the ports of Merak POP3/SMTP to standard prots i.e 110 & 25 Respectively & reboot the server. After that kindly verify if the MailServer is being selected to Merak in Plesk>Server Componenets. If it stills hows to Mailenable then change again & in few seconds it will change to Merak.

“””””””””””””””” ”””””””””””””””” ”””””””””””””””” ”””””””””””””””” ””””””””””

3. Nếu như Server của bạn đã cài đặt Sẳn IceWarp Mail Server thì bạn chỉ cần cài thêm Plesk (chú ý: không chọn cài đặt thêm Mail Enable).

Sau khi Plesk cài đặt xong anh vào theo đường dẫn và hình bên dưới để cấu hình và chọn loại Mail Server cũng như Webmail


Home>Tools & Settings>Server Components –> Webmail






Chúc anh thành công!
  Trả lời ngay kèm theo trích dẫn này
Gửi trả lời


Công Cụ
Xếp Bài

Quyền Hạn Của Bạn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Hình Cảm xúc đang Mở
[IMG] đang Mở
Mã HTML đang Tắt




Bây giờ là 01:55 PM. Giờ GMT +7



Diễn đàn tin học QuantriNet
quantrinet.com | quantrimang.co.cc
Founded by Trương Văn Phương | Developed by QuantriNet's members.
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.