Cấu hình đầu tiên cho Force10 S4810 Initial Configuation (Dell Switch 10G)
1. Kết nói Console
Cam day console rs232 (1 dầu RJ45 vào Switch, 1 đầu vào máy tính)
Theo dỏi xem Máy tính nhận cáp ở cổng Com nào? 1 , 2, 3....
2. Kết nói
Mở hypertermial "nếu máy bạn đang chạy windows 7 or 8 thì download tool này ở link sau
http://www.hilgraeve.com/hyperterminal-trial/ "
Chọn cổng COM tương ứng ở bước 1
Kết nói vào với thông số mặc định --> OK
3. Xóa bỏ cấu hình hiện tại
Force10>
Force10>enable
Force10#delete startup-config
Proceed to delete startup-config [confirm yes/no]yes
Force10#reload
System configuration has been modified. Save? [yes/no]no
Proceed with reload [confirm yes/no]yes
4. Thay đổi mode switch
Jumpstart-mode
Jumpstart (BMP) mode is the default boot mode configured for a new switch arriving from Dell Force10. This mode obtains the FTOS image and configuration file from a network source (DHCP server and file server).
When the force10 is reloaded it always starts with thtis image if its not disabled, as I found after setting a few parameters and having to end my afternoon at work with a reset switch.
FTOS# reload-type normal-reload
5. Thay đổi Tên, thời gian
> enable
# config
(conf)# hostname mychosenname
(conf)# clock timezone UTC 0
(conf)# exit
# clock set hh:mm:ss dd month yyyy
# clock update-calendar
# show clock
# show calendar
# write mem
6. Enable port
en
conf
inter Tengi 0/1
no shut
7. Chuyển từng port vào vlan
en
conf
inter Tengi 0/1
no shut
switchport
7.1 Chuyển tất cả các port vào Vlan
FTOS#configure
FTOS(conf)#interface range tengigabitethernet 0/0 – 47
FTOS(conf -if-range-te-0/0-47)#switchport
FTOS(conf -if-range-te-0/0-47)#no shutdown
FTOS(conf -if-range-te-0/0-47)#exit
FTOS(conf)#exit
8. Xem vlan
# show vlan
9. Enable SSH
ip ssh server enable
ip ssh server version 2
10 . Đặt IP cho cổng quản lý
# enable # config
(conf)# interface man 0/0
(conf-if-ma-3/0)# ip address 192.168.1.100/24
or
(conf-if-ma-3/0)# ip address 192.168.1.222/24
(conf-if-ma-3/0)# show config
(conf-if-ma-3/0)# exit
(conf)# exit
# write mem (or reload, and reply yes to Save question)
11. Tao User va Login
FTOS(conf)#username admin privilege 15 password 0 123456
FTOS(conf)#enable password level 15 0 123456
Link tham khao:
http://en.community.dell.com/cfs-fil...edownload=true
http://sillymachines.blogspot.com/20...figuation.html
How Do I Reset the S-Series to Factory Defaults - S4810P
Chú ý: Làm theo bài dưới, 1 người rút điện switch, và 1 người chuẩn bị sẳn để kết nói vào switch ngay sau khi cấm điện, vì chỉ vài giây trể thôi là sẽ qua bước nhấn ESC
?http://blog.igics.com/2014/05/recove...ssword-on.html