Liên Kết Thiết Bị Giá Rẻ

Chia Sẽ Kinh Nghiệm Về IT

Tìm Kiếm Với Google

Gởi Ðề Tài Mới  Gửi trả lời
Công Cụ Xếp Bài
Tuổi 07-09-2015, 10:01 AM   #1
Trả Lời: n/a
How to setup HAProxy with Keepalived
How to setup HAProxy with Keepalived

Back once again it’s Linux time. This post also can be named as how to set up a floating IP between load balancers or how to set up a shared IP for between load balancers or how to configure a high available load-balancers. what happens here we are using keepalived, which allows us to setup HAProxy nodes to create active/passive cluster so that load can be divided amount node members. If the main HAProxy node goes down, the second one(slave node) will be elected as master node. We are getting it done using VRRP.
What & How VRRP Works

The VRRP protocol provides automatic assignment of available IP to participating hosts which ensures that one of participating nodes is master. The master and slave node acts as a group where the backup node listens for multicast packets from a node with a higher priority which could the master node. If the backup node fails to receive VRRP advertisements for a period of time longer than three times of the advertisement timer, the backup node takes the master state and assigns the configured shared/floating IP to itself. In case there are more than one backup nodes with the same priority, the one with the highest IP wins the election.
Keepalived is a routing software written in C. The main goal of this project is to provide simple and robust facilities for loadbalancing and high-availability to Linux system and Linux based infrastructures.
HAProxy is a free, very fast and reliable solution offering high availability, load balancing, and proxying for TCP and HTTP-based applications. It is particularly suited for very high traffic web sites and powers quite a number of the world’s most visited ones.
Today what we are trying to implement the load balancer cluster as follows. It’ll be an active/passive load balancer cluster
Keepalived & HAProxy Load Balancing

I’m using below IPs for explanation purposes.
  • Master node address:
  • Slave node address: 1192.168.6.170
  • Shared/Floating Virtual address:
Below mentioned is the two scenario that can occur within a active/passive load balancer cluster.
Master Load Balancer is Up. Usual Scenario

Master Load Balancer is Down. Slave Load Balancer Takes Over

Configuring HAProxy and Keepalived

1. Full:


  Trả lời ngay kèm theo trích dẫn này
Gửi trả lời

Công Cụ
Xếp Bài

Quyền Hạn Của Bạn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Hình Cảm xúc đang Mở
[IMG] đang Mở
Mã HTML đang Tắt

Bây giờ là 02:18 AM. Giờ GMT +7

Diễn đàn tin học QuantriNet |
Founded by Trương Văn Phương | Developed by QuantriNet's members.
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.