Chia Sẽ Kinh Nghiệm Về IT



Tìm Kiếm Với Google
-


Gởi Ðề Tài Mới  Gửi trả lời
 
Công Cụ Xếp Bài
Tuổi 30-03-2017, 02:58 PM   #1
hoctinhoc
Guest
 
Trả Lời: n/a
Fix lỗi: Command rejected: An interface whose trunk encapsulation is "Auto"
Hướng dẫn Fix lỗi: Command rejected: An interface whose trunk encapsulation is "Auto" can not be configured to "trunk" mode

Để fix lỗi này bạn chỉ cần gõ lệnh sau:

=====================
conf t
int gi0/10
switchport trunk encapsulation dot1q

=====================

Bài viết tiếng Anh:


How to fix “An interface whose trunk encapsulation is Auto can not be configured to trunk mode” in cisco switch

Posted on August 17, 2011 by ruchi 1 Comment
When you try to configure trunk port you might see following error
An interface whose trunk encapsulation is Auto can not be configured to trunk mode

To fix this you need set encapsulation to 802.1q using the following
command:


conf t
int gi4/10
switchport trunk encapsulation dot1q



This should fix your issue
  Trả lời ngay kèm theo trích dẫn này
Gửi trả lời


Công Cụ
Xếp Bài

Quyền Hạn Của Bạn
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Mở
Hình Cảm xúc đang Mở
[IMG] đang Mở
Mã HTML đang Tắt




Bây giờ là 04:26 PM. Giờ GMT +7



Diễn đàn tin học QuantriNet
quantrinet.com | quantrimang.co.cc
Founded by Trương Văn Phương | Developed by QuantriNet's members.
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.