Truy cập FTP bằng dòng lệnh trong CMD

Truy cập FTP bằng dòng lệnh trong CMD



Truy cập the Start Menu and Click Run...


In the Run dialog box, type cmd and click OK



The Windows Command Prompt will open. Type the following command to connect to your server:


ftp yourdomain.com
Where yourdomain.com is your domain or the FTP Server IP Address found in the HELM Control Panel under the FTP Account Details.





Once you hit Enter it will attempt to connect to the server. If it is successful, you will be prompted for a Username and Password. Enter the FTP username and password information to login.
Once you have Logged in, you should see a line like ftp>
To list the Directory Contents, use the command dir




You have successfully connected to your server through FTP using Windows Command Prompt.


Một số lênh thao khảo thêm:


ABOR - abort a file transfer
CWD - change working directory
DELE - delete a remote file
LIST - list remote files
MDTM - return the modification time of a file
MKD - make a remote directory
NLST - name list of remote directory
PASS - send password
PASV - enter passive mode
PORT - open a data port
PWD - print working directory
QUIT - terminate the connection
RETR - retrieve a remote file
RMD - remove a remote directory
RNFR - rename from
RNTO - rename to
SITE - site-specific commands
SIZE - return the size of a file
STOR - store a file on the remote host
TYPE - set transfer type
USER - send username

• ! - Runs the specified command on the local computer
• ? - Displays descriptions for ftp commands
• append - Appends a local file to a file on the remote computer
• ascii - Sets the file transfer type to ASCII, the default
• bell - Toggles a bell to ring after each file transfer command is completed (default = OFF)
• binary - Sets the file transfer type to binary
• bye - Ends the FTP session and exits ftp
• cd - Changes the working directory on the remote computer
• close - Ends the FTP session and returns to the command interpreter
• debug - Toggles debugging (default = OFF)
• delete - Deletes a single file on a remote computer
• dir - Displays a list of a remote directory's files and subdirectories
• disconnect - Disconnects from the remote computer, retaining the ftp prompt
• get - Copies a single remote file to the local computer
• glob - Toggles filename globbing (wildcard characters) (default = ON)
• hash - Toggles hash-sign (#) printing for each data block transferred (default = OFF)
• help - Displays descriptions for ftp commands
• lcd - Changes the working directory on the local computer
• literal - Sends arguments, verbatim, to the remote FTP server
• ls - Displays an abbreviated list of a remote directory's files and subdirectories
• mdelete - Deletes one or more files on a remote computer
• mdir - Displays a list of a remote directory's files and subdirectories
• mget - Copies one or more remote files to the local computer
• mkdir - Creates a remote directory
• mls - Displays an abbreviated list of a remote directory's files and subdirectories
• mput - Copies one or more local files to the remote computer
• open - Connects to the specified FTP server
• prompt - Toggles prompting (default = ON)
• put - Copies a single local file to the remote computer
• pwd - Displays the current directory on the remote computer (literally, "print working directory")
• quit - Ends the FTP session with the remote computer and exits ftp (same as "bye")
• quote - Sends arguments, verbatim, to the remote FTP server (same as "literal")
• recv - Copies a remote file to the local computer
• remotehelp - Displays help for remote commands
• rename - Renames remote files
• rmdir - Deletes a remote directory
• send - Copies a local file to the remote computer (same as "put")
• status - Displays the current status of FTP connections
• trace - Toggles packet tracing (default = OFF)
• type - Sets or displays the file transfer type (default = ASCII)
• user - Specifes a user to the remote computer
• verbose - Toggles verbose mode (default = ON)

Have a fun!