|
||||||||
|
||||||||
|
|
Công Cụ | Xếp Bài |
28-12-2014, 09:42 AM | #1 |
Guest
Trả Lời: n/a
|
Cấu hình đầu tiên cho Force10 S4810 Initial Configuation (Dell Switch 10G)
Cấu hình đầu tiên cho Force10 S4810 Initial Configuation (Dell Switch 10G) 1. Kết nói Console Cam day console rs232 (1 dầu RJ45 vào Switch, 1 đầu vào máy tính) Theo dỏi xem Máy tính nhận cáp ở cổng Com nào? 1 , 2, 3.... 2. Kết nói Mở hypertermial "nếu máy bạn đang chạy windows 7 or 8 thì download tool này ở link sau http://www.hilgraeve.com/hyperterminal-trial/ " Chọn cổng COM tương ứng ở bước 1 Kết nói vào với thông số mặc định --> OK 3. Xóa bỏ cấu hình hiện tại Force10> Force10>enable Force10#delete startup-config Proceed to delete startup-config [confirm yes/no]yes Force10#reload System configuration has been modified. Save? [yes/no]no Proceed with reload [confirm yes/no]yes 4. Thay đổi mode switch Jumpstart-mode Jumpstart (BMP) mode is the default boot mode configured for a new switch arriving from Dell Force10. This mode obtains the FTOS image and configuration file from a network source (DHCP server and file server). When the force10 is reloaded it always starts with thtis image if its not disabled, as I found after setting a few parameters and having to end my afternoon at work with a reset switch. FTOS# reload-type normal-reload 5. Thay đổi Tên, thời gian > enable # config (conf)# hostname mychosenname (conf)# clock timezone UTC 0 (conf)# exit # clock set hh:mm:ss dd month yyyy # clock update-calendar # show clock # show calendar # write mem 6. Enable port en conf inter Tengi 0/1 no shut 7. Chuyển từng port vào vlan en conf inter Tengi 0/1 no shut switchport 7.1 Chuyển tất cả các port vào Vlan FTOS#configure FTOS(conf)#interface range tengigabitethernet 0/0 – 47 FTOS(conf -if-range-te-0/0-47)#switchport FTOS(conf -if-range-te-0/0-47)#no shutdown FTOS(conf -if-range-te-0/0-47)#exit FTOS(conf)#exit 8. Xem vlan # show vlan 9. Enable SSH ip ssh server enable ip ssh server version 2 10 . Đặt IP cho cổng quản lý # enable # config (conf)# interface man 0/0 (conf-if-ma-3/0)# ip address 192.168.1.100/24 or (conf-if-ma-3/0)# ip address 192.168.1.222/24 (conf-if-ma-3/0)# show config (conf-if-ma-3/0)# exit (conf)# exit # write mem (or reload, and reply yes to Save question) 11. Tao User va Login FTOS(conf)#username admin privilege 15 password 0 123456 FTOS(conf)#enable password level 15 0 123456 Link tham khao: http://en.community.dell.com/cfs-fil...edownload=true http://sillymachines.blogspot.com/20...figuation.html How Do I Reset the S-Series to Factory Defaults - S4810P Chú ý: Làm theo bài dưới, 1 người rút điện switch, và 1 người chuẩn bị sẳn để kết nói vào switch ngay sau khi cấm điện, vì chỉ vài giây trể thôi là sẽ qua bước nhấn ESC ?http://blog.igics.com/2014/05/recove...ssword-on.html |
|
|